- Make sure this fits by entering your model number.
- •【10 LED Bulbs & 5 Levels Brightness Available】Unique Hollywood style dimmable vanity mirror lights with 10 LED bulbs, 5 levels adjustable lighting environment to makeup in dark. 7500K white light closely simulates natural sunlight, recommended by professional makeup artist, soft and not dazzling, protect your eyes to be hurt by the light and no worry to makeup for a long time.
- •【DIY Flexible Hidden Cable Between Bulbs】13.1FT/4M in full length makes this makeup mirror lights fit most mirrors. Cable between bulbs is adjustable and flexible according to your mirror size. Cable length varies from 26cm to 0cm with rotating the bulbs easily. Cable wires can be hidden neatly under bulb base, give you a clear neat beautiful Vanity Mirror.
- •【Simple Installation & Easy Operation】Vanity light comes with sticky 3M double-sided sticker, just peel off the tape paper stick on your mirror, mirror frame, wall or anywhere with smooth surface you need to decorate, USB plug supports 5V/2A, convenient to connect with wall plug or any power source.
- •【Smart Memory Dimmer Switch】Smart on/off dimmable switcher to adjust the brightness for your need at any time. Make you relax to makeup under the ideal brightness and present a perfect makeup. Memory function means the lights will always stay on your desired brightness level when you switched off last time.
- 【Multiple uses】vanity light can be applied to make-up, fill light, decoration and shooting and so on. Mirror not included. Never have to replace the bulbs.
Packaged included:
1 x 13.1ft/4m Hollywood LED light kit
1 x smart memory dimmable switch
1 x instruction manual
Installation Steps
1：Cosmetic mirror or be installed surface treatment: should be sticky surface should be dry, clean, no rust, oxidation ,grease, dust and other pollutants
2:According to the design of the number of mirrors and bulbs each bulb installation location, note the lamp spacing of up to 26cm, the minimum spacing of about 15 cm.
3:Remove the product to determine the power and control switch to place the seat is appropriate to determine the first light paste location(with control switch to connect the first wire)
4:The bottom of the product 3M double-sided adhesive tape tear off the film, and then affixed to the first lamp position, forced down, so that 3M double-sided adhesive paste better. Make the tape and the bonding surface get full contact.
5:Paste the second lamp, if the wire length can be adjusted clockwise by rotating the middle frame,(hald0turn the middle frame conterclockwise, gently pull the two wires can be pulled out of line),adjust the length of the wire can be followed by repeating this step Paste the back if the lamp(or adjust the length of the wire as necessary and then paste).
Precautions for use
1:It is recommended to choose 2A or above USB power adapter, mobile phone charger and other standard USB mobile power can be used.
2:The product uses 3M paste fixed, requiring installation of the bonding surface must be clean, dry, smooth, cannot have rust and oil.
3:If the wire length can be adjusted clockwise by rotating the middle frame, take the wire conterclockwise rotation of the middle frame half circle, gently pull the two wires can be pulled out of the wire, repeat this step